EnergyMate Mounting Bracket and Hardware Kit

HyPower EnergyMate Mounting Bracket and Hardware Kit

HyPower EnergyMate mounting bracket and hardware kit designed for compatible pier, pole, and piling installations. Features a four-corner and center attachment arrangement with hardware for securing the bracket to a compatible EnergyMate power pedestal.

The HyPower EnergyMate Mounting Bracket and Hardware Kit provides a mounting solution for compatible EnergyMate electrical power pedestals installed on waterfront piers, poles, and other approved upright structures. Designed to support the attachment of an EnergyMate unit to an appropriately specified mounting location, this kit incorporates a four-corner and center attachment arrangement identified in HyPower product documentation. The kit includes associated hardware for securing the mounting bracket to the EnergyMate pedestal, helping installers establish the intended connection between the equipment and its mounting bracket. This mounting configuration offers an alternative to stand-based installations where the project design calls for attachment to a suitable existing support. Proper installation depends on the selected EnergyMate model, supporting structure, mounting dimensions, field attachment hardware, and applicable structural and electrical requirements. The bracket and hardware must be installed in accordance with the approved equipment documentation to ensure the installation is appropriately supported.

Key Features & Benefits

• Pier and pole mounting: Designed for compatible EnergyMate installations requiring attachment to an approved pier, pole, piling, or upright support structure.
• Four-corner attachment design: Incorporates the four-corner mounting arrangement identified in the HyPower product documentation.
• Center attachment provision: Includes a center attachment arrangement as part of the specified mounting bracket design.
• EnergyMate attachment hardware: Includes associated hardware identified for securing the mounting bracket to a compatible EnergyMate pedestal.
• Alternative mounting configuration: Provides a mounting option for projects using an approved upright structure rather than a separate EnergyMate stand.
• Waterfront utility applications: Intended for compatible marina, dockside, and pier electrical pedestal installations.
• Dedicated EnergyMate kit: HyPower part number 1044221 identifies the specified mounting bracket and associated attachment hardware for applicable equipment configurations.

Product Details

Before Ordering

Before ordering, verify the exact HyPower EnergyMate pedestal model, mounting bracket dimensions, attachment points, and compatibility with the intended pier, pole, or piling. Confirm the supporting structure's dimensions, material, condition, and ability to accommodate the specified mounting arrangement. The kit is identified as including hardware for securing the bracket to the EnergyMate, but hardware needed to attach the bracket to the supporting structure should not be assumed included unless specifically confirmed. Review the installation drawings to determine whether additional bolts, anchors, fasteners, or structural reinforcements are required. The four-corner and center attachment design does not establish a specific load rating or universal mounting compatibility. The EnergyMate power pedestal itself should not be assumed included. Installation should follow HyPower equipment instructions, applicable structural requirements, and local electrical codes. A qualified installer should verify mounting suitability before the equipment is placed into service.

Have questions about compatibility, installation requirements, or availability? Contact the HyPower team for product guidance.